<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protected-vlan reference-instance 2 to 3
reset rrpp statistics
Syntax
reset rrpp statistics domain domain-id [ ring ring-id ]
View
User view
Default Level
1: Monitor level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
ring-id: RRPP ring ID, in the range 1 to 64.
Description
Use the reset rrpp statistics command to clear RRPPDU statistics.
If you have specified an RRPP ring ID in the command, RRPPDU statistics of the specified RRPP ring
in the specified RRPP domain on the current device are cleared. Otherwise, RRPPDU statistics of all
RRPP rings in the specified RRPP domain are cleared.
Related commands: display rrpp statistics.
Examples
# Clear the RRPPDU statistics of ring 10 in RRPP domain 10.
<Sysname> reset rrpp statistics domain 1 ring 10
ring
Syntax
ring ring-id node-mode { { master | transit } [ primary-port interface-type interface-number ]
[ secondary-port interface-type interface-number ] level level-value | { edge | assistant-edge }
[ edge-port interface-type interface-number ] }
undo ring ring-id
View
RRPP domain view
Default Level
2: System level
3-12