<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] step 2
ACL Application Commands
acl logging frequence
Syntax
acl logging frequence frequence
undo acl logging frequence
View
System view
Default Level
2: System level
Parameters
frequence: Interval in minutes for packet filtering statistics. It must be an integer in the range of 0 to
1440 and a multiple of five.
Description
Use the acl logging frequence command to set the interval for IPv4 packet filtering statistics. At the
specified interval, the device outputs the statistics information, including the number of filtered packets,
and the ACL rules used.
Use the undo acl logging frequence command to restore the default.
By default, the interval is 0, that is, no IPv4 packet filtering statistics is collected.
Examples
# Set the interval for IPv4 packet filtering statistics to 10 minutes.
<Sysname> system-view
[Sysname] acl logging frequence 10
acl ipv6 logging frequence
Syntax
acl ipv6 logging frequence frequence
undo acl ipv6 logging frequence
View
System view
Default Level
2: System
14-32