Lock - HP E4510-48G Command Reference Manual

Description
Use the idle-timeout command to set the timeout time. The connection to a user interface is
terminated if no operation is performed in the user interface within the specified period.
Use the undo idle-timeout command to revert to the default timeout time.
You can use the idle-timeout 0 command to disable the timeout function.
The default timeout time is 10 minutes.
Examples
# Set the timeout time of AUX 0 to 1 minute.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] idle-timeout 1 0

lock

Syntax
lock
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the lock command to lock the current user interface to prevent unauthorized users from operating
the user interface.
With the execution of this command, the system prompts to enter and confirm the password (up to 16
characters), and then locks the user interface.
To cancel the lock, press the Enter key and enter the correct password.
By default, the system will not lock the current user interface automatically.
Examples
# Lock the current user interface.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
locked !
1-14