Self-Service-Url Enable - HP E4510-48G Command Reference Manual

[Sysname-luser-user1] password simple 123456

self-service-url enable

Syntax
self-service-url enable url-string
undo self-service-url enable
View
ISP domain view
Default Level
2: System level
Parameters
url-string: URL of the self-service server for changing user password, a string of 1 to 64 characters. It
must start with http:// and contain no question mark.
Description
Use the self-service-url enable command to enable the self-service server localization function and
specify the URL of the self-service server for changing user password.
Use the undo self-service-url enable command to restore the default.
By default, the function is disabled.
Note that:
A self-service RADIUS server, for example, iMC, is required for the self-service server localization
function. With the self-service function, a user can manage and control his or her accounting
information or card number. A server with self-service software is a self-service server.
After you configure the self-service-url enable command, a user can locate the self-service
server by selecting [Service/Change Password] from the 802.1X client. The client software
automatically launches the default browser, IE or Netscape, and opens the URL page of the
self-service server for changing the user password. A user can change his or her password
through the page.
Only authenticated users can select [Service/Change Password] from the 802.1X client. The
option is gray and unavailable for unauthenticated users.
Examples
# Enable the self-service server localization function and specify the URL of the self-service server for
changing user password to http://10.153.89.94/selfservice/modPasswd1x.jsp|userName for the default
ISP domain system.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system]
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
self-service-url
1-29
enable