Display Dldp Statistics - HP E4510-48G Command Reference Manual

display dldp statistics

Syntax
display dldp statistics [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Port type and port number.
Description
Use the display dldp statistics command to display the statistics on the DLDP packets passing
through a port.
If you do not provide the interface-type or interface-number argument, this command displays the
statistics on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics
Interface GigabitEthernet1/0/50
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Interface GigabitEthernet1/0/51
Packets sent : 7
Packets received : 7
Invalid packets received : 3
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 4
# Display the statistics on the DLDP packets passing through GigabitEthernet 1/0/50.
<Sysname> display dldp statistics gigabitethernet 1/0/50
Interface GigabitEthernet1/0/50
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
4-3