Smart Link Configuration Commands; Display Smart-Link Flush - HP E4510-48G Command Reference Manual

1

Smart Link Configuration Commands

Smart Link Configuration Commands

display smart-link flush

Syntax
display smart-link flush
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display smart-link flush command to display information about the received flush messages.
Examples
# Display information about the received flush messages.
<Sysname> display smart-link flush
Received flush packets
Receiving interface of the last flush packet
Receiving time of the last flush packet
Device ID of the last flush packet
Control VLAN of the last flush packet
Table 1-1 display smart-link flush command output description
Received flush packets
Receiving interface of the last flush packet
Receiving time of the last flush packet
Device ID of the last flush packet
Control VLAN of the last flush packet
Field
: 10
: GigabitEthernet1/0/1
: 19:19:03 2009/06/27
: 000f-e200-8500
: 1
Description
Total number of received flush messages
The port that received the last flush message
Time when the last flush message was received
Device ID carried in the last flush message
Control VLAN ID carried in the last flush message
1-1