Description (For Ipv4) - HP E4510-48G Command Reference Manual

Parameters
acl-name: Name of the IPv4 ACL, a case insensitive string of 1 to 32 characters. It must start with an
English letter and cannot be the English word of all to avoid confusion.
Description
Use the acl name command to enter the view of an existing IPv4 ACL by specifying its name.
Examples
# Enter the view of the IPv4 ACL named flow.
<Sysname> system-view
[Sysname] acl name flow
[Sysname-acl-basic-2002-flow]

description (for IPv4)

Syntax
description text
undo description
View
Basic IPv4 ACL view, advanced IPv4 ACL view, Ethernet frame header ACL view
Default Level
2: System level
Parameters
text: ACL description, a case-sensitive string of 1 to 127 characters.
Description
Use the description command to configure a description for an IPv4 ACL to, for example, describe the
purpose of the ACL.
Use the undo description command to remove the ACL description.
By default, an IPv4 ACL has no ACL description.
Examples
# Configure a description for IPv4 ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] description This acl is used in geth 1/0/1
# Configure a description for IPv4 ACL 3000.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] description This acl is used in geth 1/0/1
# Configure a description for ACL 4000.
<Sysname> system-view
14-8