HP E4510-48G Command Reference Manual page 931

Description
Use the display cfd mep command to display the attribute and operating information of MEP(s).
Examples
# Display the attribute and operating information of MEP 50 in service instance 1.
<Sysname> display cfd mep 50 service-instance 1
Interface: GigabitEthernet1/0/2
Maintenance domain: mdtest_1
Maintenance association: matest_1
Level: 1
Administrative state: Active
FNG state: FNG_DEFECT_REPORTED
CCM:
Current state: CCI_WAITING
Interval: 1s
Loopback:
NextSeqNumber: 8877
SendLBR: 0
Linktrace:
NextSeqNumber: 8877
SendLTR: 0
No CCM from some remote MEPs is received.
One or more streams of error CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:5 Sequence Number:0x50A
MAC Address: 000F-E25D-F31B
Received Time: 2008/04/26 12:51:31
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6 Sequence Number:0x63A
MAC Address: 000F-E25D-578C
Received Time: 2008/04/26 12:51:33
Some other MEPs are transmitting the RDI bit.
Table 6-9 display cfd mep command output description
Field
Interface
VLAN: 1 Direction: Outbound
SendCCM: 12018
ReceiveInOrderLBR: 0
ReceiveLTM: 0
Interface that an MD belongs to
CCM send: Enable
ReceiveOutOrderLBR: 0
Description
6-17