Tracert Ipv - HP E4510-48G Command Reference Manual

2 128.32.210.1 19 ms 19 ms 19 ms
3 128.32.216.1 39 ms 19 ms 19 ms
4 128.32.136.23 19 ms 39 ms 39 ms
5 128.32.168.22 20 ms 39 ms 39 ms
6 128.32.197.4 59 ms 119 ms 39 ms
7 131.119.2.5 59 ms 59 ms 39 ms
8 129.140.70.13 80 ms 79 ms 99 ms
9 129.140.71.6 139 ms 139 ms 159 ms
10 129.140.81.7 199 ms 180 ms 300 ms
11 129.140.72.17 300 ms 239 ms 239 ms
12 * * *
13 128.121.54.72 259 ms 499 ms 279 ms
14 * * *
15 * * *
16 * * *
17 * * *
18 18.26.0.115 339 ms 279 ms 279 ms
Table 15-2 tracert command output description
Field
traceroute to
18.26.0.115(18.26.0.115)
30 hops max
60 bytes packet
press CTRL_C to break
1 128.3.112.1 10 ms 10 ms 10
ms
12 * * *

tracert ipv6

Syntax
tracert ipv6 [ -f first-ttl | -m max-ttl | -p port | -q packet-number | -w timeout ] * remote-system
View
Any view
Default Level
0: Visit level
Display the route the IP packets traverse from the current
device to the device whose IP address is 18.26.0.115.
Maximum number of hops of the probe packets, which can be
set through the -m keyword
Number of bytes of a probe packet
During the execution of the command, you can press Ctrl+C to
abort the tracert operation.
The probe result of the probe packets whose TTL is 1,
including the IP address of the device and the roundtrip time of
three probe packets.
The number of packets that can be sent in each probe can be
set through the -q keyword.
The probe result of the probe packets whose TTL is 12. The
result is: timeout
15-7
Description