Display Arp Timer Aging; Reset Arp - HP E4510-48G Command Reference Manual

display arp timer aging

Syntax
display arp timer aging
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display arp timer aging command to display the aging time for dynamic ARP entries.
Related commands: arp timer aging.
Examples
# Display the aging time for dynamic ARP entries.
<Sysname> display arp timer aging
Current ARP aging time is 10 minute(s)

reset arp

Syntax
reset arp { all | dynamic | slot slot-number | static | interface interface-type interface-number }
View
User view
Default Level
2: System level
Parameters
all: Clears all ARP entries except authorized ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
slot slot-number: Clears the ARP entries for the specified device. If the device is in an IRF, the
slot-number argument represents the member ID of the device; if the device is not in any IRF, the
slot-number argument represents the device ID.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
2-6