Reset Dhcp-Snooping Packet Statistics - HP E4510-48G Command Reference Manual

Default Level
1: Monitor level
Parameters
all: Clears all DHCP snooping entries.
ip ip-address: Clears the DHCP snooping entries of the specified IP address.
Description
Use the reset dhcp-snooping command to clear DHCP snooping entries.
For an IRF, DHCP snooping entries on all devices will be cleared after you execute this command.
Examples
# Clear all DHCP snooping entries.
<Sysname> reset dhcp-snooping all

reset dhcp-snooping packet statistics

Syntax
reset dhcp-snooping packet statistics [ slot slot-number ]
View
User view
Default Level
2: System level
Parameters
slot slot-number: Clears the DHCP packet statistics of the specified device. If the device is in an IRF,
the slot-number argument represents the member ID of the device; if the device is not in any IRF, the
slot-number argument represents the device ID.
Description
Use the reset dhcp-snooping packet statistics command to clear DHCP packet statistics on the
DHCP snooping device.
On a device in IRF, executing the reset dhcp-snooping packet statistics command without the slot
keyword only clears DHCP packet statistics on the device where the command is executed.
Examples
# Clear DHCP packet statistics on the DHCP snooping device.
<Sysname> reset dhcp-snooping packet statistics
7-12