Table of Contents
Advertisement
3.
Default ISP domain.
Examples
# Specify my-domain as the mandatory authentication domain for 802.1X users on
Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x mandatory-domain my-domain
Related commands
display dot1x
dot1x max-user
Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
Syntax
dot1x max-user max-number
undo dot1x max-user
Default
The device allows a maximum of 4294967295 concurrent 802.1X users on a port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
max-number: Specifies the maximum number of concurrent 802.1X users on a port. The value range
is 1 to 4294967295.
Usage guidelines
Set the maximum number of concurrent 802.1X users on a port to prevent the system resources
from being overused. When the maximum number is reached, the port denies subsequent 802.1X
users.
Examples
# Set the maximum number of concurrent 802.1X users to 32 on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x max-user 32
Related commands
display dot1x
dot1x multicast-trigger
Use dot1x multicast-trigger to enable the 802.1X multicast trigger feature.
190
Advertisement
Table of Contents
