Dhcp Relay Security Static - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
client-ip: DHCP client IP address.
Description
Use the dhcp relay release ip command to request the DHCP server to release a specified client IP
address.
Examples
# Request the DHCP server to release the IP address 1.1.1.1.
<Sysname> system-view
[Sysname] dhcp relay release ip 1.1.1.1

dhcp relay security static

Syntax
dhcp relay security static ip-address mac-address [ interface interface-type interface-number ]
undo dhcp relay security { ip-address | all | dynamic | interface interface-type interface-number |
static }
View
System view
Default Level
2: System level
Parameters
ip-address: Client IP address for creating a static binding.
mac-address: Client MAC address for creating a static binding, in the format H-H-H.
interface interface-type interface-number: Specifies a Layer 3 interface connecting to the DHCP client.
interface-type interface-number specifies the interface type and interface number.
all: Specifies all client entries to be removed.
dynamic: Specifies dynamic client entries to be removed.
static: Specifies manual client entries to be removed.
Description
Use the dhcp relay security static command to configure a static client entry, that is, the binding
between IP address, MAC address, and Layer 3 interface on the relay agent.
Use the undo dhcp relay security command to remove specified client entries from the relay agent.
No manual client entry is configured on the DHCP relay agent by default.
Note that:
5-8