Dot1X Mandatory-Domain; Dot1X Max-User - HP 6125XLG Command Reference Manual

[Sysname] interface ten-gigabitethernet 1/1/6
[Sysname-Ten-GigabitEthernet1/1/6] dot1x handshake
Related commands
display dot1x
•
dot1x timer handshake-period
•
dot1x retry
•

dot1x mandatory-domain

Use dot1x mandatory-domain to specify a mandatory 802.1X authentication domain on a port.
Use undo dot1x mandatory-domain to remove the mandatory authentication domain.
Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
Default
No mandatory authentication domain is specified.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters.
Usage guidelines
When authenticating an 802.1X user trying to access a port, the system selects an authentication domain
in the following order: the mandatory domain, the ISP domain specified in the username, and the default
ISP domain.
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on Ten-GigabitEthernet
1/1/6.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/6
[Sysname-Ten-GigabitEthernet1/1/6] dot1x mandatory-domain my-domain
Related commands
display dot1x

dot1x max-user

Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
91