Configure User Rights - HP StorageWorks Edge Switch 2/12 Installation Manual

Installing and Configuring the Edge Switch 2/12

Configure User Rights

Perform this procedure to configure the administrator-level and operator-level
passwords used to access the EWS interface through the Enter Network
Password dialog box.
To configure passwords:
1. Choose Configure > Security to display the User Rights tab
2. For the Administrator set of data fields:
Figure 23: Security page–User Rights tab
62
a. Enter the administrator user name (as specified by the network
administrator) in the New User Name field. Use 16 or fewer
alphanumeric characters.
b. Enter the administrator password (as specified by the network
administrator) in the New Password field. Use 16 or fewer alphanumeric
characters.
c. Enter the administrator password again in the Confirm New Password
field.
(Figure
Edge Switch 2/12 Installation Guide
23).