Display Dhcp-Snooping Trust; Reset Dhcp-Snooping - HP E4510-48G Command Reference Manual

Examples
# Display DHCP packet statistics on the DHCP snooping device.
<Sysname> display dhcp-snooping packet statistics
DHCP packets received
DHCP packets sent
Packets dropped due to rate limitation : 20
Dropped invalid packets

display dhcp-snooping trust

Syntax
display dhcp-snooping trust
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp-snooping trust command to display information about trusted ports.
Related commands: dhcp-snooping trust.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface
=========================
GigabiEthernet1/0/1
The above output shows that DHCP snooping is enabled, DHCP snooping trust is active, and port
GigabiEthernet 1/0/1 is trusted.

reset dhcp-snooping

Syntax
reset dhcp-snooping { all | ip ip-address }
View
User view
: 100
: 200
: 0
Trusted
============
Trusted
7-11