Voice Vlan Mode Auto; Voice Vlan Security Enable - HP E4510-48G Command Reference Manual

00d0-1e00-0000 ffff-ff00-0000 Pingtel phone
0060-b900-0000 ffff-ff00-0000 Philips/NEC phone
00e0-7500-0000 ffff-ff00-0000 Polycom phone
00e0-bb00-0000 ffff-ff00-0000 3com phone
1234-1200-0000 ffff-ff00-0000 PhoneA
# Remove the OUI address 1234-1200-0000.
<Sysname> system-view
[Sysname] undo voice vlan mac-address 1234-1200-0000

voice vlan mode auto

Syntax
voice vlan mode auto
undo voice vlan mode auto
View
Ethernet interface view
Default Level
2: System level
Parameters
None
Description
Use the voice vlan mode auto command to configure the current port to operate in automatic voice
VLAN assignment mode.
Use the undo voice vlan mode auto command to configure the current port to operate in manual
voice VLAN assignment mode.
By default, a port operates in automatic voice VLAN assignment mode.
The voice VLAN modes of different ports are independent of one another.
To make voice VLAN take effect on a port which is enabled with voice VLAN and operates in manual
voice VLAN assignment mode, you need to assign the port to the voice VLAN manually.
Examples
# Configure GigabitEthernet 1/0/1 to operate in manual voice VLAN assignment mode.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] undo voice vlan mode auto

voice vlan security enable

Syntax
voice vlan security enable
undo voice vlan security enable
8-6