Tia Setup - Agilent Technologies 93000 SOC Series Training Manual

Lesson 2 – TIA Setup
Overview
What you will learn
Related documents
In this Lesson ...
This lesson explains how to make the settings that are required for
a TIA test:
Pin Configuration for the TIA
•
Front-End and TIA Setup with the Analog Setup Tool
•
Input termination settings for the front-end module
–
Signal conditioning settings for the front-end module
–
Measurement settings for the TIA
–
Arming settings for the TIA
–
Routing Definition with the Routing Setup Tool
•
While discussing the various setup options, also the measurement
functions of the TIA, and how the settings control them, will be
explained.
After this lesson you will know how to make all settings for a TIA
test and how these settings define what measurement will be
performed by the TIA, how it will be performed, and at which
pins.
Details about the TIA test setup are provided in the manual
Agilent 93000 SOC Series "Test Setup".
•
478