Agilent Technologies 93000 SOC Series Training Manual page 337

Defining a Vector Variable
A vector variable is always related to one specific vector label and
cannot be used with another one.
Setup Window for a Vector Variable
Enter the name for the vector variable.
1
Check the box Show only DIGCapt pins if you want to see only
2
capture pins in the pin list. (Other Pins will appear shaded)
Highlight the pin(s) you want to retrieve the captured data from,
3
and copy them to the right-hand box.
Select the Transfer Mode parallel or serial.
4
In parallel mode, for each of the n selected pins one sample
(1bit) will be read, and the final n-bits sample is composed of
the individual pin samples. The sample of the first pin listed in
the vec variable pins field becomes the Most Significant Bit
(MSB) of the n-bit sample, the sample of the last pin listed
becomes the Least Significant Bit (LSB).
Lesson 3 – Setting Up the Digital Capturing
337