Lesson 5 – Executing the ADC Distortion Test
Overview
What you will learn
Related documents
In this Lesson ...
You will now learn how to set up and execute the ADC Distortion
test. For the ADC Distortion test, you will apply a sine wave
signal, capture the response, and finally calculate the total
harmonic distortion (THD) and the signal-to-noise ratio (SNR).
This lesson covers the following topics:
Explanation of the standard DAC distortion tests
•
Description of the DAC Distortion testfunction parameters
•
After this lesson you will know how set up the DAC Distortion
testfunction.
More details about the testfunction can be found in the manual
Agilent 93000 SOC Series "Standard Test Function Reference".
•
The Mixed-Signal Tool is described in
Agilent 93000 SOC Series "Test Setup"
•
354