Agilent Technologies 93000 SOC Series Training Manual page 268

Lesson 6 – Executing the DAC Linearity Test
Context Information
Buttons
As the Datalog file can contain multiple waveforms of the same
type (for example, DAC Distortion FFT, calculated for several
pins), the waveforms are simply numbered in the order as they
appear in the log file.
Datalog Waveform Selection Example
Once you have chosen a waveform to be displayed, the context
information contained in the Datalog file is automatically filled
into the right-hand part of the Select Waveform window.
The T is the name of the testfunction, and the X/Y annotations
ITLE
(Name and Unit) are taken from the log file.
Labels that could not be determined are left blank.
As you may wish to document (print) the logged data combined
with your own annotations, you can overwrite or complement the
proposals.
R S
ESET ALL ELECTIONS
S /L S : The display setting can be saved in a file and
AVE OAD ETTINGS
loaded from that file.
D : Closes the Select Waveform window and displays the chosen
ONE
waveforms in the Mixed-Signal Tool.
268
: Returns you to the default (empty) window.