Agilent Technologies 93000 SOC Series Training Manual page 86

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Lesson 1 – Analog Modules

In digitizer mode or sampler mode, the single-ended signal or

differential signal can be captured from the pins shown in the

following table.

Single-ended input

Differential input

In addition to the single-ended/differential input routes, the DC

routes and loop-back routes are available in the WDD.

All routing is switched by the input multiplexer.

For other components in the digitizer (input amplifier, filter, ADC,

timing generator, sequencer, waveform memory, and SYNC_DATA

pin), see the description in "High Resolution / High Speed

Digitizer" on page 79.

Possible Input Pin in Input Route of WDD

(for Digitizer Mode or Sampler Mode)

1 input only of 8 inputs:

A+, B+, C+, D+, A-, B-, C-, or D-

1 input only of 4 inputs:

A+&A- pair, B+&B- pair, C+&C- pair, or D+&D- pair

Show Quick Links

Table of Contents