Agilent Technologies 93000 SOC Series Training Manual page 77

Mixed-signal training
Hide thumbs Also See for 93000 SOC Series:
Table of Contents

Advertisement

Table 10
100MHz Digitizer (WDG) DC Coupling Mode
DC Coupling Mode
Key Specification
Sampling rate
Resolution
Bandwidth @ -3 dB
(characteristic data)
Pin counts per module
Waveform capture memory
Input mode
Input range
DC offset range
Common mode range
Input impedance
Filter
Table 11
100MHz Digitizer (WDG) AC Coupling Mode
AC Coupling Mode
Key Specification
Sampling rate
Resolution
Bandwidth @ -3 dB
(characteristic data)
Pin counts per module
Waveform capture memory
Input mode
Input range
Common mode range
Input impedance
Filter
Lesson 1 – Analog Modules
Value
30 Msps to 105 Msps
14-bit
DC to 100 MHz @ filter through
8 single-ended or 4 differential
16 M samples
Single-ended or differential
±2 V, ±1 V, ±0.5 V, ±0.25 V, ±0.125 V
±4 V
±3.7 V @ 50 ohm, 37.5 ohm single-ended (with offset) or
100 ohm, 75 ohm differential (with offset)
±6 V @ 10 kohm single-ended/differential (with offset)
10 kohm, 50 ohm, 37.5 ohm for single-ended
10 kohm, 100 ohm, 75 ohm for differential
Through, 26 MHz, 52 MHz, 88 MHz
Value
30 Msps to 105 Msps
14-bit
0.25MHz to 100 MHz @ filter through
8 single-ended or 4 differential
16 M samples
Single-ended or differential
±2 V, ±1 V, ±0.5 V, ±0.25 V
±6 V
50 ohm for single-ended
100 ohm for differential
Through, 52 MHz, 88 MHz
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents