2-3
Using the Text Editor for Editing a
Test Method Program
The Text Editor window is used to edit a test method program.
The Text Editor window can be started from the Project window
only.
Text Editor Window
Starting Text Editor Window for Desired Class
Source File
To start the Text Editor window for your desired class source file,
do one of the following:
Double-click the desired class name in the Class List of the
•
Project window, or select the desired class name and click on the
Open File button. The Text Editor window opens to display the
class source file from the top.
Double-click the desired method name in the Method List of the
•
Project window, or select the desired method name and click on
the Open File button. The Text Editor window opens and loads the
class source file that has the selected method. The editor window
displays the beginning of the method function.
In the Parameter and Limit Table Dialog window, click on OK after
•
setting the test method parameters.
Lesson 2 – Creating a Test Method
441