Agilent Technologies 93000 SOC Series Training Manual page 437

directory name displayed in the Location field also
automatically changes to the specified new project name at
same time.
b. Click on OK. The Project Window opens.
Project Window
Adding a Class to the Project
To add a class for the test methods you will program to the
project, do as follows:
Click the first line in the Class List.
1
Enter a new class name as shown in the following figure:
2
Entering a New Class Name
Click on Add. The class name is added into the lower list area.
3
Adding a Test Method in the Project
To add a test method (method function) into a class, do as follows:
Highlight the class in the Class List.
1
Lesson 2 – Creating a Test Method
437