Agilent Technologies 93000 SOC Series Training Manual page 308

Lesson 2 – Setting Up the Waveform Generator
execute the sequencer program from this Sub Label on, instead
from the beginning.
The S F
AMPLE REQUENCY
mutually dependent) will be filled in automatically when the
sample frequency for the WGA has been defined in the clock
domain setup.
If desired, you can enter a T
additional delay after the trigger pulse (there is always a minimum
delay which depends on the chosen analog module).
Creating a Sequencer Program
To create a new sequencer program:
Select the S
1
EQUENCER
Creating a new Sequencer Program
Enter a program name and click A
2
This brings you right to Sequencer Memory setup page.
308
or S P (these fields are
AMPLE ERIOD
D , which means the
RIGGER ELAY
P : __DEFINE_NEW_PROGRAM__.
ROGRAM
.
DD