Test Method Program For Dc Tests - Agilent Technologies 93000 SOC Series Training Manual

1-6

Test Method Program for DC Tests

You can also create a test method program of DC test with the
following DC resources:
Pin PMU: identifier is PPMU
•
High Precision (System) PMU: identifier is SPMU
•
DPS: identifier is DPS
•
For programming a DC test, you can use the following APIs instead
of the Setup, Execution and Result APIs that are shown in
Method Program Flow" on page
where, there are two types of APIs to program PPMUs. You can
select better type for your application.
These APIs perform setting up and execution of a DC test and
retrieve the results instead of Setup API, Execution API and Result
API of the AC test.
You can also use the following APIs for programming a DC test.
TEST
•
Judges the DC test result as pass/fail, and performs data logging.
PMU_AUTORANGE
•
Sets the autorange mode of PMUs.
Lesson 1 – Test Method Structure
401:
"Test
425