Agilent Technologies 93000 SOC Series Training Manual page 44

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Lesson 3 – Introduction to the Software

Waveform modifications for special applications are supported,

for example, jitter modulation and simulation of the effect of a

cable on the signal.

Mixed-Signal Tool - Waveform Generation

The generated waveform can be downloaded to the waveform

memory of an AWG, or to the vector memory of digital pins.

Waveforms resulting from mixed-signal tests can be viewed and

analyzed with the Mixed-Signal Tool. To do this, the tool provides

various features:

Display of multiple waveforms

Up to three waveforms from different locations, e.g. generated

waveforms, and calculated waveforms like FFT or DNL, can be

Automatic real-time update

To display result waveforms during test execution. Used for

Overlay mode

Allows you to overlay waveforms. This makes it easy to spot

changes as a result of setup changes.

Zoom, scaling and making measurements

Standard zooming, setting markers, measuring marker distances,

and scaling features are build in.

Tools to perform signal harmonics and distortion analysis.

Supports the analysis of result waveform characteristics.

Show Quick Links

Table of Contents