Lesson 5 – Waveform Generation with the Mixed-Signal Tool
Click OK.
5
Enter the file name and click OK.
6
How to Restore Saved Waveforms
To load a saved waveform into one of the display areas:
In the general section menu, click the F
1
Choose O
W
2
PEN
AVEFORM
Loading a Waveform from a File
Choose the waveform display area where the waveform shall be
3
displayed.
Choose the format in which the waveform has been saved:
4
Binary data is stored in float32 format.
–
ASCII data is stored as decimal floating point numbers.
–
Enhanced ASCII includes not only the waveform, but also
–
context information, such as scaling, title, source, etc.
Click OK.
5
Choose the file from the list and click OK.
6
I/O button.
ILE
.
235