Agilent Technologies 93000 SOC Series Training Manual page 378

Lesson 2 – Analog Clock Domain Setup
Overview
What you will learn
In this Lesson ...
This lessons explains the setup parameters for the analog clock
domain and describes the procedure how to set up analog modules
in the analog clock domain.
Several clock domain parameters and specific parameters for
analog modules must be set. Certain interdependencies between
the parameters must be considered when setting up more than one
analog module.
After this lesson you will know how to use the Analog Setup Tool
to set up analog modules in the analog clock domain. You will
understand the setup parameters and their interdependencies.
378