Agilent Technologies 93000 SOC Series Training Manual page 483

Input Pin
Output Pin
(for loop-back)
Front-End Setup Area
The settings you make only apply to the input channels of the TIA
core displayed in the B
connected to the front-end module, you can make other settings,
after you have selected this core in the B
Input Termination
The termination for each input channel can be defined
independently. Two termination options are available:
Z n = 10kOhm, terminated to ground
•
i
Z n = 50Ohm with a programmable termination voltage in the
•
i
range -2.0V to 6.0V (resolution 1mV)
Front-End Setup Parameters
field. For the other core that is
OARDS
OARDS
Lesson 2 – TIA Setup
Pins routed to
the TIA core
External
Triggering
field.
483