Agilent Technologies 93000 SOC Series Training Manual page 110

Lesson 1 – Analog Modules
Specification
Sampling rate
Resolution
Bandwidth @-3 dB
(characteristic data)
Pin counts
Waveform capture memory
Input range
DC offset range
Common mode range
(AC+DC)
Input impedance
(nominal value)
Filter
Audio Digitizer in Measure Unit
Table 20 Audio Digitizer Key Specifications
Value
32 ksps to 200 ksps
24-bit
50 kHz
4 single-ended (2 at a time) or 2 differential (2 at a time)
per measure unit. 2 digitizer cores per measure unit
For Multi-site Baseband Analog Source & Measure:
4 measure units in module. 8-parallel test
For Multi-site Baseband Analog Measure:
8 measure units in module. 16-parallel test
7 M samples per measure unit (@ no averaging)
±3 V, ±1 V, ±0.2 V
±3 V @ ±3 V input range
±2 V @ ±1 V input range
±1.5 V @ ±0.2 V input range
±3 V @ ±3 V input range
±2 V @ ±1 V input range
±1.5 V @ ±0.2 V input range
> 1 Mohm for single-ended
> 1 Mohm for differential
50 kHz (Fixed anti-aliasing analog filter, nominal value)
Digital filter: 6 kHz, 30 kHz
110