Lesson 5 – Waveform Generation with the Mixed-Signal Tool
5-4
NOTE
Saving and Restoring Waveforms
The contents of each waveform display area can be saved in a file
and restored from that file.
How to Save Waveforms
To save the contents of a waveform display area in a file:
In the general section menu, click the F
1
Saving Waveform Data in a File
Choose S
W
2
AVE
AVEFORM
Choose the format in which the waveform shall be saved:
3
Binary data is stored in float32 format.
–
ASCII data is stored as decimal floating point numbers.
–
Enhanced ASCII includes not only the waveform, but also
–
context information, such as scaling, title, source, etc.
If the display area you wish to save contains overlaid waveforms, you
can save all the waveforms in one file using the E
format. If you specify B
saved.
Choose the waveform display area the contents of which shall be
4
saved.
234
ILE
.
or ASCII, the last uploaded waveform is
INARY
I/O button.
ASCII
NHANCED