Agilent Technologies 93000 SOC Series Training Manual page 232

Lesson 5 – Waveform Generation with the Mixed-Signal Tool
Scaling and markers
Waveform area
context menu
From the SelectView window, you can also change the color, line
type, or interpolation mode of each waveform display area
individually.
How to Adjust the Waveform Displays
Every waveform display area has a title bar, vertical and
horizontal scroll bars, context information at the left-hand side
and below the waveform, one or two markers, and one or two
marker indication rows.
Waveform Display Area Controls
To change the scales:
Using the left mouse button, click the horizontal or vertical scale
1
display boxes and enter the desired minimum and maximum
values
– or –
click the A S
UTO CALE
automatically to fit the whole waveform into the display.
To move a marker:
Using the left mouse button, click the marker and drag it.
1
The marker's x/y-position is shown numerically in the marker
indication row.
Additional functions are provided by the waveform context menu:
Position the mousepointer on one of the waveform display areas
1
and click the right mouse button.
The waveform context menu pops up.
232
button that scales the waveform display