Agilent Technologies 93000 SOC Series Training Manual page 112

Lesson 1 – Analog Modules
Specification
Sampling rate
Resolution
Bandwidth @-3 dB
(characteristic data)
Pin counts
Waveform capture memory
Input range
DC offset range
Common mode range
(AC+DC)
Input impedance
(nominal value)
Filter
Video Digitizer - Direct Mode in Measure Unit
Table 22 Video Digitizer Direct Mode Key Specifications
Value
Same as for normal mode
Same as for normal mode
100 MHz
2 single-ended (one at a time) or 1 differential per measure unit.
For Multi-site Baseband Analog Source & Measure:
4 measure units in module. 4-parallel test
For Multi-site Baseband Analog Measure
8 measure units in module. 8-parallel test
Same as for normal mode
±0.5 V
±1.5 V
±2 V
Single-ended: 50 ohm
Differential center GND: 100 ohm
Through
112