Agilent Technologies 93000 SOC Series Training Manual page 69

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Single-ended

Differential

Mix of single-ended and

differential

Each output pin belongs to one AWG core only, and is not shared

by the other core.

In addition to the output routes, the DC routes and loop back

routes are available in the WGE. All routing is switched by the

output multiplexer.

For other components in the AWG (output amplifier, attenuator,

filter, DAC, timing generator, sequencer, waveform memory, and

SYNC_DATA pin), see the description in "High Resolution / High

Speed / 500M AWG" on page 66.

Possible Pin Combinations of Output Routes (WGE)

8 outputs (4 outputs simultaneously):

(A+ or B+), (A- or B-), (C+ or D+), and/or (C- or D-)

4 outputs (2 outputs simultaneously):

(A+&A- pair or B+&B- pair) and/or (C+&C- pair or D+&D- pair)

Single-ended mode in one AWG core, and differential mode in

the other AWG core.

Lesson 1 – Analog Modules

Show Quick Links

Table of Contents