Agilent Technologies 93000 SOC Series Training Manual page 240

Lesson 5 – Waveform Generation with the Mixed-Signal Tool
How to Set the Operation and Output Values
Parameters
Whichever waveform generation tool you have chosen, each of
them will ask you how to interpret and what to do with the new
waveform:
Operation and Output Value Settings
To specify the use of the new waveform:
Choose to replace the previously generated waveform by the
1
NEW
new waveform
– or –
click to append the new waveform to the previously
APPEND
generated waveform
– or –
choose to combine the previously generated waveform with
MATH
the new waveform.
The math operation (add, subtract, multiply, or divide) can start
at zero or at any other point position (entered in the P
the previously generated waveform.
The O V setting refers to the final waveform, that
UTPUT ALUES
means after any mathematical operation.
To specify the data format:
Choose for a waveform that shall be sent to an AWG (e.g. for
1
FLOAT
testing an ADC or buffer)
– or –
choose or
INT FLOAT
memory (e.g. for testing a DAC).
240
for a waveform that shall be sent to vector
field) of
OS