Agilent Technologies 93000 SOC Series Training Manual page 241

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Lesson 5 – Waveform Generation with the Mixed-Signal Tool

How to Use the Multitone Setup Tool

The Multitone Setup Tool consists of three windows that allow you

define the individual tones of the waveform in the frequency

choose an algorithm to determine the phase offsets for the

individual tones,

calculate and view the final waveform in the time domain.

You can switch back and forth between these windows to make

modifications of the waveform definition and see the calculated

results. When you are satisfied with the generated multitone

waveform, you can transfer it to the Generated Waveform display

of the Mixed-Signal Tool.

Multitone Setup Tool Overview

Define the individual tones of the multitone waveform by entering

the frequency or the frequency bin, amplitude and phase offset

(optional). You can set up the tones using the dialog window

opened by clicking the Q

With the frequency bin number N and the sampling frequency Fs,

you define the frequency resolution ∆f = Fs/2N. This is the

minimum allowed frequency distance between two tones of the

multitone waveform.

Show Quick Links

Table of Contents