Lesson 3 – Setting Up the Digital Capturing
Overview
What you will learn
In this Lesson ...
In this lesson deals with the Digital Capture capabilities of the
Agilent 93000 SOC Series, and how to use it for ADC testing.
The lesson covers the topics:
Introduction to Digital Capture
•
Setup for Digital Capture
•
The lesson focuses on the aspects of the timing, vector and level
setup, that are specific to Digital Capture tests. Also, the creation
of vector variables for Digital Capture and the special capture
settings to make are covered.
After this lesson you will know how to make all setups for
capturing digital data, as required to retrieve and analyze the
digital output of an ADC.
324