Setting Up The Waveform Generator - Agilent Technologies 93000 SOC Series Training Manual

Lesson 2 – Setting Up the Waveform Generator
Overview
What you will learn
Related documents
In this Lesson ...
This lesson describes how to set up the Arbitrary Waveform
Generator (AWG) for the AWG test. The lesson covers the following
topics:
Hardware settings, sequencer program definition, waveform
•
memory setup and sampling frequency specification for the AWG
(Analog Setup Tool)
Creating an analog waveform and downloading it to the AWG
•
(Mixed-Signal Tool).
Setting up the signal routing for the ADC test (Routing Setup Tool)
•
In this lesson, you will learn how to use the tools for mixed-signal
testing to set up the arbitrary waveform generator for the
execution of the ADC tests.
More information about the Analog Setup Tool, the Mixed-Signal
Tool and the Routing Setup Tool has been given in Unit 3.
Detailed information on the Analog Setup Tool, the Mixed-Signal
Tool and the Routing Setup Tool can be found in the manual
Agilent 93000 SOC Series "Test Setup"
•
304