Agilent Technologies 93000 SOC Series Training Manual page 246

Mixed-signal training

Hide thumbs Also See for 93000 SOC Series:

Table of Contents

Lesson 5 – Waveform Generation with the Mixed-Signal Tool

Marker Signal Setup

To set up the marker signal:

Fill in the sample at which the signal shall start.

Enter the level (low or high) the signal shall start with

Define the period (in number of samples of the waveform) the

marker signal shall remain at high and a low level.

Enter the number of marker signal periods (a period consists of

one low level and one high level section). Alternatively, you can

select infinite to maintain the marker signal as long as the output

waveform is generated.

You can also load a marker signal you saved before. A marker

signal can be saved with the File I/O menu, using the Enhanced

ASCII format.

Show Quick Links

Table of Contents