Lesson 7 – Executing the DAC Distortion Test
Overview
What you will learn
Related documents
In this Lesson ...
You will now learn how to set up and execute the DAC Distortion
test. For the DAC Distortion test, you will apply a sine wave signal,
capture the response, and finally calculate the total harmonic
distortion (THD) and the signal-to-noise ratio (SNR).
The Mixed-Signal Tool will be used for displaying the calculated
spectrum.
This lesson covers the following topics:
Explanation of the standard DAC distortion tests
•
Description of the DAC Distortion testfunction parameters
•
Uploading and displaying the calculated spectrum with the Mixed-
•
Signal Tool.
After this lesson you will know how set up the DAC Distortion
testfunction, and how to retrieve the test results.
More details about the testfunction can be found in the manual
Agilent 93000 SOC Series "Standard Test Function Reference".
•
The Mixed-Signal Tool is described in
Agilent 93000 SOC Series "Test Setup"
•
274