Agilent Technologies 93000 SOC Series Training Manual page 415

to apply the changes. In addition, FLUSH can be used to apply the
changes without executing the digital sequence program before the
Execution API.
For the primary waveform set, timing set, level set, DPS set, or
vector label, only the set number or label can be changed to
another set number or label. The Setup APIs have the following
style:
•To change one member of the primary set:
Primary.Member( Para )
•To change multiple members of the primary set:
Primary.Member1( Para1 ).Member2( Para2 ) . . .MemberN(ParaN)
Waveform set number
Timing set number/Timing spec
Level set number/Level spec
DPS set number
Sequence Start Label
Changing Primary Sets Related to Digital and DPS
The following examples show how to change the primary sets
related to digital and DPS:
•Changing the waveform set number to "1":
Primary.waveform(1);
•Changing the waveform set number to "2" and timing
set number to "3"
Primary.waveform(2).timing(3);
•Changing the start sequence label to "Test_2":
Primary.label("Test_2");
Examples of Changing Primary Sets Related to Digital and DPS
Lesson 1 – Test Method Structure
waveform( INT no )
timing( INT no )
level( INT no )
dps( INT no )
label ( STRING seq_label )
:
415