Adc Linearity Test Parameters - Agilent Technologies 93000 SOC Series Training Manual

4-2

ADC Linearity Test Parameters

In the Test Control window you enter the parameters for the
execution of the ADC Linearity testfunction.
SOC ADC Linearity Test Control Window
V : The vector variable to be used to retrieve the captured
•
EC LIST
ADC output data.
L : For future enhancement. Leave this field empty.
•
OG LIST
R : The routing set to be used.
•
OUT LIST
Measurements
In this section you activate the measurements/result calculations
to be performed, and enter the required parameters.
You can choose from the available units and enter the pass/fail
limits.
The M column allows you to select the desired calculation
ETHOD
method for the DeviceLSB. The calculation methods are equivalent
Lesson 4 – Executing the ADC Linearity Test
347