Executing Testmethod-Based Test Suite - Agilent Technologies 93000 SOC Series Training Manual

2-7 Executing Testmethod-Based Test
Suite
This section explains how to execute a testmethod-based test suite.
Setting Flags Before Execution
In the system flags, testflow flags, and testsuite flags, there are
flags related to the test method program execution.
To invoke the flags window where you can define the system flags,
•
press the SYS push-button, or select the System Flags option from
the Select menu of the Test Flow Editor.
To invoke the flags window where you can define the testflow
•
flags, select the Testflow Flags option from the Select menu of the
Test Flow Editor.
To invoke the flags window where you can define the testsuite
•
flags, click the Flags tab of the Testsuite Dialog for the testmethod-
based test suite.
Below, the flags related to the test method program execution are
briefly discussed.
debug_analog (testflow flag)
If this flag is turned on, the
information on analog debugging to the Mixed-signal Tool if you
have already opened that tool. Even if you do not open the Mixed-
signal Tool, you can view transferred information when you open
the tool later. See"Recording data to log file" on page
log_events_enable (system flag)
If you turn this flag on, the general datalog capability is activated
in the test method API. See
Log MX Waveforms (testsuite flag)
If this flag is turned on together with the log_events_enable flag,
the
PUT_DATALOG
data to the event datalog subsystem.
on page 460.
Set break point (testsuite flag)
Before you debug a testmethod-based test suite, you must set this
flag. If this flag is turned on for a testmethod-based test site, a
breakpoint is set at the beginning in the test method program.
Lesson 2 – Creating a Test Method
PUT_DEBUG
"Recording data to log file" on page
API transfers waveform data including array
See"Recording data to log file"
API can transfer
460.
460.
453