Agilent Technologies 93000 SOC Series Training Manual page 75

Table 8
Specification
Sampling rate
Resolution
Bandwidth @-3 dB
Pin counts per module
Number of digitizer cores
per module
Waveform capture memo-
ry
Input range
DC offset range
Common mode range
Input impedance
Filter
20MHz Digitizer (WDE) Key Specifications
Value
125 ksps to 5 Msps
16-bit
20 MHz @filter through
8 single-ended or 4 differential (2-parallel test)
2
1 M samples (per digitizer core)
±2 V, ±1 V, ±0.5 V, ±0.25 V, ±0.125 V
±4 V
±6 V @ 1 Mohm single-ended (with offset)
±2 V @ 50 ohm single-ended (with offset)
±6 V @ 100 ohm or 1 Mohm differential (with offset)
1 M ohm, 50 ohm for single-ended
1 M ohm, 100 ohm for differential
Through, 150 kHz, 500 kHz, 1.5 MHz, 3.25 MHz
Lesson 1 – Analog Modules
75