Preparations To Develop A Test Method Program - Agilent Technologies 93000 SOC Series Training Manual

Lesson 2 – Creating a Test Method
2-2 Preparations to Develop a Test
Method Program
Before you develop a test method program, at least the following
preparation tasks are required in the following order:
1. Creating a project directory.
2. Adding a class source file to the project directory.
3. Adding a test method program to the class source file.
4. Setting test method parameters and test names.
Creating a Project Directory
To create a project directory for the test methods you will
program, do as follows:
Do one of the following:
1
In the Testflow Editor window, select test method editor
–
from the Edit pull-down menu.
– In the main menu, select Test Method Editor from the
Production item of the Tools menu, or click on the Test
Method Editor icon on the Production page.
Main Menu
The Project Selection Dialog box appears. The default project
name and location are displayed in this dialog box as follows:
Project Name:
Location:
<device_dir>/TestMethod/testmethodlib
To create a new project under the <device_dir>/TestMethod/
2
directory:
a. Enter a new project name into the Project Name field.
When you enter the new project name, the default project
436
testmethodlib