Agilent Technologies 93000 SOC Series Training Manual page 179

Lesson 2 – Waveform Digitizer Setup with the Analog Setup Tool
How to Delete an Analog Set
An Analog Setup File can hold up to 256 sets. The sets are
identified by integer numbers from 1 to 256.
Sets which are no longer needed can be deleted, using the
Undefine Set button.
Deleting Sets From a Setup
How to Reset an Analog Module
You may wish to reset the chosen analog module or all modules to
start-up conditions. This can be done with the R function.
ESET
Resetting an Analog Module
You can not only delete all waveform labels or sequencer
programs, but also set all settings of the currently chosen analog
module, or of all analog modules to start-up conditions.
179