Defining And Downloading A Waveform To The Awg - Agilent Technologies 93000 SOC Series Training Manual

2-2 Defining and Downloading a
Waveform to the AWG
The waveforms to be sourced to a mixed-signal device can be
conveniently created, stored, and reloaded with the Mixed-Signal
Tool.
Generating a Waveform
To generate a waveform:
Click the G
1
ENERATE
Select one of the tools for waveform generation.
2
For the ADC test, you will use the Waveform Editor as shown
below.
Generate the waveform with the selected tool. For the ADC test,
3
ramp for the ADC Linearity test, and a sine wave for the ADC
Distortion test will be needed.
Waveform Generation for ADC Testing
Lesson 2 – Setting Up the Waveform Generator
button of the Mixed-Signal Tool.
317