Digital Capture Setup
Test Execution Setup
Once the setup data is entered, the test execution can be defined.
The central element in the test execution is the test suite. A test
suite typically performs on specific device test.
The test suite is an element of the test flow. It is set up with the
Test Flow Editor.
Typically, a test suite runs a device test, using a particular sub-set
of all the setup data for the device. The test that is run by the test
suite can be realized in three ways:
as a Testfunction
•
•
as a Test Method
as a User Procedure
•
Lesson 3 – Introduction to the Software
49